AI boat monitoring for charter fleets and private yachts. The Commander Unit connects to your marine electronics, monitors every system 24/7, and reports to you via WhatsApp, app, or cloud dashboard.
Tap any step to learn more. Data flows from your marine electronics to your phone.
You install it. It learns your boat. You get WhatsApp alerts.
A compact unit goes at your nav station and plugs into your NMEA 2000 network. Compatible with all major marine electronics — Garmin, Raymarine, Simrad, B&G, Victron, and more.
Installation by owner. No wiring changes to your boat.
Commander auto-discovers every sensor on board. Twin engines? Two battery banks? Solar? Shore power? It figures out what you have and adapts automatically.
No configuration needed. No device lists. It just learns.
On board? Open the Commander App — no internet needed. Away with Starlink or WiFi? Get WhatsApp alerts. Add Master for the full cloud dashboard, push notifications, and historical analytics.
Text status or tap the app anytime for a full report.
78+ use cases across charter operations, private yacht ownership, marine professionals, deliveries, and marinas.
Auto-alerts when house bank drops below threshold — guests never notice until it's too late.
Coolant temp spikes trigger instant WhatsApp alerts before a novice skipper causes damage.
GPS drift monitoring with configurable swing radius. Alert fires the moment anchor moves beyond safe zone.
Track pump cycles per hour. Abnormal frequency = water ingress detected early, not at the dock.
Low tank warnings prevent running dry mid-charter. Guests get gentle reminders before it's a problem.
Depth sounder integration alerts before grounding. Configurable per-vessel draft settings.
Set charter zone boundaries. Get notified if a boat leaves the permitted cruising area.
Low oil pressure while running = immediate alert. Catch engine problems before they become engine replacements.
On-board wind speed and direction with threshold alerts for high wind conditions.
Detect when shore power is lost or disconnected — before batteries start draining.
Real-time engine hours per charter. Know exactly how hard each boat was used.
On-board cameras with AI vision. Detect unauthorized boarding, unusual activity, or deck incidents.
Charterers text "status" or "help" and get instant boat info — reduces base support calls.
Automated system check before each charter — batteries, tanks, engines, safety gear. One-tap readiness report.
Compare system readings post-charter to pre-charter baseline. Flag anomalies for inspection.
Confirm fuel and water tanks are topped off before handover. No disputes about what was full or empty.
Post-charter battery analysis: cycles, depth of discharge, charging patterns. Predict replacements before failures.
Automated report: engine hours run, fuel burned, miles traveled, max speed, systems used. Full charter audit trail.
Commander flags items needing attention based on real data — not guesswork. Prioritized by urgency.
See every boat on one map. Real-time positions, heading, speed. Click any vessel for full telemetry.
Compare fuel consumption, battery health, engine hours, and maintenance costs across your entire fleet.
Engine hours, oil changes, haul-out dates. Commander tracks the data, Master schedules the work.
Push firmware and config updates to your entire fleet remotely. No boat visits needed.
All fleet alerts in one stream. Filter by severity, boat, or type. Route critical alerts to the right team member.
Fuel, maintenance, and wear data per charter. Know your true cost per booking and optimize pricing.
Each boat gets an AI-generated health score based on all sensor data. Spot declining boats before breakdowns.
Add new boats to your fleet in minutes. Commander auto-discovers the vessel and syncs to your dashboard.
Automated logs for safety inspections, engine hours, and maintenance records. Export-ready for auditors.
Set your swing radius — Commander monitors GPS drift continuously. Sleep soundly knowing you'll be woken if it drags.
Continuous depth tracking with configurable shallow water alerts. Essential for reef-strewn anchorages.
Coolant temp, oil pressure, RPM, alternator output. Commander knows your engine's normal — and alerts when it's not.
Real-time fuel burn rate + remaining fuel = estimated range at current speed. Plan passages confidently.
On-board wind instruments feed real-time data. Set threshold alerts for gusts or sustained wind changes.
Automatic logging of positions, speed, heading, wind, engine hours. Your passage record, built automatically.
Ask questions in plain English: "How's the engine running?" "Should I worry about this battery trend?" Local AI answers instantly.
Full real-time gauges, camera feeds, and controls via the on-board app. Works without internet over boat WiFi or Bluetooth.
Enhanced monitoring while crew sleeps. Tighter alert thresholds, anchor watch active, AIS monitoring, depth alerts.
Engine hours, oil changes, impeller replacements. Commander reminds you when it's time, based on actual usage.
With Master: trend charts for battery health, fuel efficiency, engine performance. Your boat gets smarter over time.
Monitor house and start batteries while you're home. Get alerts before a dead bank means a dead weekend.
Know instantly when shore power drops or disconnects at the marina. Batteries start draining — you'll know first.
Bilge pump running more than usual? Commander catches water ingress early — even if you're 1,000 miles away.
Monitor cabin conditions to prevent mold, mildew, or freeze damage. Seasonal storage peace of mind.
AI-powered intrusion detection. Get a photo and alert if someone boards your vessel unexpectedly.
GPS drift + wind data detects when your boat is straining at the dock during storms.
Track solar charge vs. consumption while at the marina. Know if panels are keeping up or need cleaning.
Text "status" anytime and get a full boat report. No app needed, no login, just a message.
Automated weekly summary: battery trends, power usage, bilge activity, any anomalies. Delivered to WhatsApp.
Full NMEA 2000 backbone discovery — every device, every address, every PGN. Map the boat's entire data network in 24 hours.
Charging patterns, parasitic draw detection, state of health, depth of discharge cycles. Find the drain your customer can't explain.
Engine hours, error codes, coolant trends, oil pressure patterns, alternator output. Full engine health report from NMEA data.
Identify out-of-spec readings, intermittent connections, and phantom sensors. Find the flaky transducer before your customer does.
AI compares readings against benchmarks for the boat class. Flags anything unusual — from voltage sags to temperature spikes.
Drop the scanner on the boat before you visit. Know what tools and parts to bring before you drive to the marina.
48 hours of continuous data reveals patterns that a 30-minute sea trial never will. Intermittent faults, charging anomalies, slow leaks.
How does this boat compare to others in its class? Battery health, fuel efficiency, engine hours vs. age. Data-driven context for your diagnosis.
Generate professional reports for insurance surveys, pre-purchase inspections, and annual certifications. Verified sensor data, not estimates.
Back up visual inspections with 48 hours of verified sensor data. Engine health, electrical system analysis, battery condition, and network topology — evidence-based assessments for pre-purchase, insurance, and condition surveys.
Real-time engine, battery, and bilge data throughout the delivery. Know the boat's condition at every waypoint — not just departure and arrival.
Live GPS tracking with automatic position reports. Boat owner sees exactly where their vessel is at all times during the delivery.
Automated log of the entire passage — engine hours, fuel consumption, weather encountered, route taken. Professional handoff documentation.
Instant alerts to owner and captain if anything goes out of spec during transit. Bilge pumps, battery voltage, engine temps — caught in real time.
Plug-and-play boat monitoring in 60 seconds. Internet required — Starlink, marina WiFi, or hotspot. Just plug in and go.
Total hardware: ~$325
Plug the NMEA 2000 cable into any open T-connector on the backbone
Plug the USB-C power into any 12V outlet or AC socket
Wait for the green light (60 seconds)
Log into the Commander App on your phone — your boat appears automatically
No configuration needed. Plug into any internet source — Starlink, marina WiFi, or hotspot. Master starts receiving data automatically via VPN Tunnel.
Owner tracks their boat in real-time during delivery passages. Position, engine health, fuel, ETA — all via WhatsApp. Captain plugs it in, owner gets updates. No crew involvement needed.
Deploy pucks across slips to monitor every vessel. Shore power status, bilge activity, battery health, security alerts. Automate dock walks and catch problems before owners call.
Leave the puck plugged in while your boat sits on the hard or at a winter slip. Battery, bilge, and temperature alerts via cellular — even 1,000 miles away.
Portable diagnostic scanning for marine professionals. Plug into any boat, scan for 24–48 hours, deliver a comprehensive report.
Plug In — Connect the Diagnostic Scanner to any open T-connector on the boat's NMEA 2000 backbone. Same 60-second setup as the Delivery Puck.
Scan 24–48h — The scanner runs Auto-Discovery, then deep analysis. It captures full operating patterns — charging cycles, parasitic draw, intermittent faults, and usage data a short test would miss.
Get Report — Data uploads to Master Cloud. You receive a comprehensive diagnostic report on the Service Portal — network map, anomaly flags, benchmarks, and maintenance recommendations.
Drop the scanner on the boat before you visit. Know exactly what's wrong, what tools and parts to bring, and show up prepared. No more wasted trips.
Offer boat owners an annual "heartbeat" scan. 48 hours of continuous monitoring reveals trends, degradation, and maintenance items they can't see on a sea trial.
Verified monitoring data for marine underwriting. Continuous sensor logs, network health, and system benchmarks — professional documentation, not estimates.
Surveyors plug in the scanner during pre-purchase or condition inspections. 48 hours of continuous data backs up the visual survey with verified sensor readings, engine analysis, and electrical system health — turning a subjective report into an evidence-based assessment.
Commander adapts to specialized marine operations.
Verified monitoring data for claims. Continuous engine logs, GPS tracks, and maintenance records reduce risk profiles.
Portable diagnostic scanning for marine technicians. Plug into any boat, scan 24–48h, deliver a professional report via the Service Portal.
Four Commander Unit options — matched to how you use your boat.
Compact, always-on, and built for fleets. Cloud AI processing via internet — no local model needed.
Plug-and-play monitoring. Internet required — Starlink, marina WiFi, or hotspot. Ideal for deliveries, marinas, and seasonal storage.
Full power for private owners. Runs AI locally with Qwen 14B — works completely offline.
Same hardware as the Delivery Puck, configured for portable diagnostic scans. Moves between boats — plug in, scan, retrieve.
Marine-grade PoE cameras with two-way communication, night vision, and AI-powered monitoring. Works with Mac Mini M4 — all video processing happens on board.
Marine-grade IP cameras powered over ethernet. One cable for power and data. Mount anywhere on deck, salon, or engine room.
Built-in speaker and microphone on each camera. Talk to crew, guests, or dock hands remotely from your phone.
IR and color night vision for 24/7 monitoring. AI detects motion, people, and anomalies — processed locally on the Mac Mini.
Video recorded to NVMe SSD connected to the Mac Mini. Weeks of continuous footage stored on board — no cloud fees, no bandwidth limits.
Simple, transparent pricing. No hidden fees.
Tailored to your fleet size and hardware choice. Pi or Mac Mini — we build the right solution.
Buy or rent for deliveries, marina monitoring, or seasonal storage.
Tailored to your vessel and needs.
Per-scan fee — pass the cost to the boat owner. Or go unlimited.
Everything you need to monitor your boat from anywhere.
Commander scans your NMEA 2000 network and learns what sensors YOUR boat has. No configuration files, no device lists. Adapts to any vessel automatically.
Native app for iOS and Android. On board: connects directly via boat WiFi or Bluetooth — no internet required. Real-time gauges, alerts, camera feeds, and full command interface.
Rule-based alert engine — no AI, no hallucinations. Pure code monitoring thresholds 24/7. Battery, engines, bilge, anchor, depth, tanks.
Instant responses for status, engines, battery, tanks, wind, anchor, and position. Pre-built templates, no AI latency.
Charter fleets use cloud AI via Master. Private yachts run Qwen 14B locally on Mac Mini M4 — fully offline. Ask about your boat in plain English.
Private yacht Commanders work with zero internet. Charter units need connectivity for cloud AI. Core monitoring and alerts always run locally.
Set your swing radius and Commander monitors GPS drift continuously. If your anchor drags, you know immediately via WhatsApp.
Security cameras, FLIR thermal imaging, and night vision. Monitor your vessel visually — on board or remotely. AI vision detects intrusions and thermal anomalies.
Every connected boat feeds the network. Crowdsourced wind, depth, anchorage intel, hazard alerts, and real-time passage conditions — shared across the fleet.
Every Commander is a sensor. Master connects them into a shared intelligence network.
Every boat pushes real-time telemetry to Master — position, wind, depth, barometric pressure, sea state. FleetMind aggregates this data and pushes relevant insights back to every vessel in the network. No extra hardware. Pure cloud logic.
20 boats spread across the cruising ground, all reporting wind. FleetMind builds a real-time wind map — not forecast, actual measured conditions. "15kt gusts reported by 3 boats in the channel."
Every boat with a depth sounder is ground-truthing the chart. FleetMind aggregates depth readings + GPS into a live depth overlay. "Boat ahead of you just measured 4ft in that channel."
"5 boats currently at The Bight — average depth 22ft, wind 8kt east, all holding well." Charterers approaching an anchorage get real intel from boats already there.
A boat that just crossed a stretch reports sea state, current, and wind. The next boat heading that way gets a real-time heads-up — not a 6-hour-old forecast.
One boat finds an uncharted obstruction, lobster pots, or debris. FleetMind broadcasts to all boats in the area automatically.
Master cross-references fleet positions against incoming weather cells. Boats in the path get proactive alerts — "Squall line approaching your position in 45 minutes."
FleetMind is included with all Master Cloud plans. Every connected boat makes the network smarter. Data is anonymized and opt-in.
Alerts fire automatically via WhatsApp. No need to ask. All thresholds are configurable.
| Alert | Trigger | Requires | |
|---|---|---|---|
| 🔋 | Battery Low | SOC < 20% |
Battery monitor |
| 🔋 | Battery Critical | SOC < 10% |
Battery monitor |
| 🌡️ | Engine Overheat | Coolant > 95°C |
Engine sensors |
| 🛢️ | Low Oil Pressure | < 25 PSI while running |
Engine sensors |
| 🚰 | Bilge Pump | > 6 cycles in 30 min |
Bilge pump counter |
| ⚓ | Anchor Drag | GPS drift > set radius |
GPS + anchor watch |
| 🌊 | Shallow Water | Depth < configured min |
Depth sounder |
| ⛽ | Low Fuel | < 15% |
Tank sensors |
| 💧 | Low Water | < 15% |
Tank sensors |
This is what it looks like. Real commands, real responses.
⚓ VESSEL STATUS 📍 Position 18°27.3'N 64°37.1'W At anchor — Virgin Gorda ⚙️ Engines Port: OFF (1,847 hrs) Stbd: OFF (1,832 hrs) 🔋 Battery House: 87% 25.4V -2.1A Start: 100% 13.2V Solar: +14.2A (342W) ⛽ Tanks Fuel: 72% | Water: 45% 🌬️ Wind 8kt NE | Depth 28ft9:41
⚓ ANCHOR WATCH Status: SET — holding Radius: 45m set | 12m current Drift: 0.3m in last hour GPS: 18°27.342'N 64°37.089'W Depth: 28ft (stable)14:30
Included with every charter fleet plan. Optional subscription for private yacht owners. Commander works standalone — Master adds cloud power.
Master manages your Commander Units remotely. Software updates, alert tuning, sensor calibration — all handled over the air.
Cloud-stored telemetry history. Trend analysis, seasonal comparisons, maintenance predictions. Your boats get smarter over time.
Full web dashboard from any browser — live telemetry, historical charts, camera feeds. Push notifications for critical alerts.
Commander is currently in development. Get in touch to learn more or join the early access program.